WANLIN-303
Standalone photoelectric smoke alarm family
Review standalone, 433 MHz, LoRa or 4G candidates only after the exact hardware and radio version is identified.
Direct answer
What is an export standalone smoke alarm?
An export standalone smoke alarm detects smoke and provides a local audible warning without requiring a conventional fire alarm control panel. For LoRa systems, buyers should first define the protected space, required local alarm behaviour, reporting method, power arrangement and destination-market evidence.
This page is written for system integrators planning long-range, low-power fire alarm reporting. It is a product-family selection resource, not a claim that every variant has the same approval, radio module or market access.
Model reference image
Review the exact configuration, not only the family name
The image identifies a WANLIN-307 family reference. Radio, power, label and evidence scope can differ by controlled configuration; confirm the SKU/BOM before using any formal product or compliance statement.
Open the WANLIN-307 product passport · Review the public evidence center
Verified manual data
WANLIN-307 documented configuration
Evidence scope: WANLIN-307 user manual, Ver 1.0. Documented manual configuration only; radio, platform, power and market variants require separate SKU/BOM confirmation.
| Detection principle | Infrared photoelectric smoke sensing with MCU processing |
|---|---|
| Rated working voltage | DC 3 V |
| Battery capacity | 2400 mAh |
| Standby current | ≤ 6 μA |
| Alarm current | ≤ 100 mA |
| Sound pressure | > 80 dB(A) at 3 m directly in front |
| Operating temperature | −10 °C to +50 °C |
| Relative humidity | ≤ 95% RH at 40 °C ± 2 °C |
| Alarm output | Audible and visual alarm |
| Low-voltage indication | Below 2.7 V; indicator and one chirp about every 40 s |
| Normal indicator | Indicator illuminates about every 40 s |
| Approximate weight | 140 g including battery |
| Manual-listed execution standard | GB 20517-2006 |
| Installation reference | GB 50116-2013; final layout must follow project design requirements |
Important: “GB 20517-2006” is presented here as the execution standard stated by this manual. This wording is not a third-party certificate claim and does not establish destination-market acceptance. The manual also advises against use where relative humidity exceeds 95%, air speed exceeds 5 m/s, or heavy dust, water mist, steam, oil mist or corrosive gas is present.
Site-specific planning lens
How does LoRa Fire Detection Systems for Residential Projects affect selection?
If the exact configuration is absent from the available evidence, mark the claim pending review instead of extending a result from another variant.
The enquiry should state country, building use, quantity, sensing functions, communication preference, packaging language and target schedule.
Existing site context: This resource explains Wanlin Fire lora fire detection systems for residential projects, key specifications, suitable applications and purchasing considerations for professional buyers. Use that context to define the application; it does not replace model-specific technical or compliance review.
For this site's LoRa systems focus, the planning lens is “LoRa Fire Detection Systems for Residential Projects.” Freeze the sensing function first, then define how an event is heard locally and how it should be reported beyond the room.
The maintenance plan should identify battery or power checks, functional testing, device replacement, event escalation and ownership of any connected service.
Last reviewed: 2026-11-02 · Reviewed by Wanlin Fire Equipment for product-family and evidence-boundary consistency.
Which product family fits the project?
WANLIN-307
Connected standalone smoke alarm family
Candidate configurations may include standalone, 433 MHz, LoRa, 4G or NB-IoT; availability and evidence must be confirmed per SKU/BOM.
WANLIN-309
Wireless reporting smoke alarm family
Use when the project requires a local alarm plus a defined reporting path; verify gateway, network and destination-market requirements.
WANLIN-370
Combination alarm reference
A smoke/heat/carbon-monoxide combination concept is not interchangeable with a smoke-only alarm; confirm the required sensing functions first.
What must buyers verify before ordering?
- Exact model and SKU/BOM
- Intended country and standard
- Certificate or report scope and validity
- Radio, gateway and network architecture
- Packaging, label and instruction language
Answers for buyers
Standalone smoke alarm questions
Can one certificate be applied to every WANLIN smoke alarm variant?
No. A certificate or test report must match the exact model, hardware or radio configuration, legal certificate holder, standard, validity period and destination market.
Why is the exact SKU or BOM important?
Communication modules, power arrangements, labels and other components may differ within a family. Evidence and purchasing documents should therefore identify the exact controlled configuration.
What should be checked during sample approval?
Check model marking, sensing function, alarm behaviour, communication path, power arrangement, gateway or platform interaction, label artwork, manual revision and the evidence pack.
Does remote notification replace the alarm sound?
No. Remote event reporting and local audible warning are separate functions. The project specification should define both and identify who responds to remote events.
Can a local-only alarm later become a connected alarm?
Only if the selected hardware and product architecture support that path. Do not assume a radio module can be added to every local-only version; confirm the exact SKU/BOM and gateway requirements.
Request a model-specific export review
Send the destination country, application, quantity, reporting method, preferred power arrangement and required delivery schedule to wanlinfirecontrol@163.com. Recommendations and formal claims remain subject to exact-model evidence review.
Browse product information · Read technical FAQs · Contact Wanlin Fire